HR-FMS Environment Monitorin...
- Airborne Particle Counters
Biological Air Sampler
Air Capture Hood and Anemome...
Differential Pressure Meter
Temperature and Humidity Met...
GK-01 High Pressure Diffuser
YWF-01 Fog Generator
Gelbo Flex Tester System
Choosing The Right Panel Material For Your Modular Cleanroom
Choosing The Right Panel MaterialForYourModularCleanroom
Deciding whether your cleanroom should be modular instead of drywall is not the only decision a project team has to make when conside ring a cleanroom. In most cases, the choice of panels is not as clear cut as once was the norm.
Once you’ve decided that you need a cleanroom, then what ? For one, you have to decide what type of clean-room you require. Many people within an organization will not have the knowledge necessary to make an informed decision regarding their cleanroom construction materials . An outside design and building firm is typically the answer .
Before you set out to approve a cleanroom vendor ,it’s important for you to understand some basics. With so many vendor s available you’ll want to know what makes one vendor standout from another. Various clean-room vendors supply a multitude of different wall panels , insulation, ceiling systems, and floors .But which one is right for you ?
One of the first questions is modular or drywall ? Modular offers the most flexibility. It will allow you to expand as your business expands .Drywall has its economical advantages but is quite permanent, and can be more expensive if all cost variables are factored in.
Cost: Undoubtedly, the solution using drywall coated with epoxy paint looks, at first glance, the most in expensive option. In fact , while the level of initial in vestment could be lower compared with the cost of square feet of installed wall using a modular system, the picture may change looking at a wider scenario. The cost comparison should also take into account the need for project supervision during as sembly and the need for training of contractors who usually are not familiar with the strict rules of a pharmaceutical, bio technology, or any company that needs to maintain clean environment sand are a separation.
Need of flexibility: A modular system is intrinsically aflexible system. Different suppliers offer different levels of flexibility ; but, in the end , you will be always be able to change you partition lay out before ,during ,and after wall assembly. Depending on the modular clean room supplier of your choice, this might be more or less easy, but it will be feasible; it will be done in a clean way without the need to create dust , debris, and any type of scrapin compatible with production areas.
Timing: Drywall can be supplied in a shorter time frame. A modular cleanroom company might have the need to manufacture custom-made accessories, while the contract or selected for drywall can be on site “the next day.”
Project management resources : As mentioned above ,going with drywall will mean the need formore involvement of project management ; if these resources are not available internally , then out sourcing them might lead to communication or cost control issues .A modular wall system company should supply project management as apart of it score business .
Project environment: Creating partition and ceilings within an existing production area might lead to a problem with on going production incompatible with material used for erectingdrywalls.
Durability: Modular cleanroom supplier shave a large variety of materials that differ interms of durability. Some offer materials that give a much higher reliability in terms of robustness in comparis on with drywalls. Drywalls might be faster to install, but in certain situations , the walls will get worn faster .
Financing :Modular clean rooms can be considered, from a financial stand point ,as equipment . They can be leased or expensed in your financial statement as any other piece of equipment.